• United States (USD)
  • Deutschland (EUR)
  • Deutsch
  • French
  • Requires WPML plugin
ADD ANYTHING HERE OR JUST REMOVE IT…
  • English
  • Deutsch
angrencopper.eu
angrencopper.eu

UZCCP.EU+49 402 261 92 16     

UZCCP+44 751 419 79 97

UZCCP.EU +49 179 482 14 88
UZCCP.EU sales@angrencopper.eu
angrencopper.eu
angrencopper.eu
Menu
  • English
  • Deutsch
Browse Categories
  • ABOUT COMPANY
  • OUR PRODUCTS
  • OUR GOALS
  • LOOKING FOR DEALER
  • OUR MISSION
  • OUR CLIENTS
  • CERTIFICATES
  • QUALITY CONTROL
  • CONTACTS
  • MEDIA WORLD
Browse Categories
  • English
  • Deutsch
Click to enlarge
Home FLAT SPIRAL COIL

Standard ➤ EN 12735-1:2020, EN 1057:2020, EN 1652:1998, O’zDSt 3348:2018
Components ➤ Cathode copper, phosphor copper
Copper grade ➤ М1 (Cu-ETP / E-Cu)
Copper content ➤ Cu ≥ 99.9 %
Tube properties ➤ Hard, semi-soft, soft
Type of packaging ➤ Coil with flat spiral winding
Measured value ➤ Tonne
Delivery form ➤ In flat spiral windings from 15 to 50 m
Dimensions ➤ Diameter from 4 to 22mm. Wall thickness from 0.27mm to 1.5mm
Application ➤ in heating and water supply systems, in high-pressure systems, for the transport of compressed air and gas, condensate drainage; in fuel systems, in superconductor applications as heat dissipators, etc.
Our copper pipe spirals are the ideal solution for applications that require flexibility, efficiency and durability. Manufactured from high quality copper grade M1(Cu-ETP / E-Cu) with copper content Cu ≥ 99.9 %, offer excellent thermal and electrical conductivity, combined with a robust yet flexible structure, which ensures a long service life.

Category: FLAT SPIRAL COIL
  • Shipping & Delivery
  • DESCRIPTION
Shipping & Delivery

We deliver all over Europe.

DESCRIPTION
Long service life (the service life of copper water and gas pipes is about 50 years). High anticorrosive properties (they are not subject to corrosion, as a result of which they have a longer service life and reduce the cost of operating pipelines). Slight thermal expansion. They withstand high and low temperatures well. The minimum allowed temperature is minus 100 °C. The maximum permissible operating temperature of copper pipes reaches plus 250 ° C. However, the melting point of copper compounds used in pipeline systems, exceeds 1100 ° C, which allows us to talk about the heat resistance corresponding to refractory pipes. Strength (high margin of mechanical strength to hydraulic damage). Ability to withstand high pressures (indifferent to any possible pressure values in water supply systems). The fracture pressure for a copper pipe is from 25 to 220 atmospheres at 100 ° C (depending on the size of the pipe), which creates a huge margin of safety. Simplicity and ease of installation due to the high flexibility and elasticity (plasticity) of copper. The material consumption during installation can be calculated with an accuracy of up to a centimeter (minimum waste). High resistance to defrosting (in case of termination, interruptions of heat or power supply). Resistance to vibration (indifference to vibration, including in winter). Gas tightness (impermeable not only for liquids, but also for gases, for example oxygen, which is very important for heating systems and water supply systems). No aging of the material. Environmental friendliness (do not emit harmful and toxic compounds) and health safety. They are resistant to sludge formation in panel heating systems due to 100% diffusion impermeability. Good for health, high bactericidal and bacteriostatic properties (i.e. prevents the growth of bacteria on the inner surface of the pipe). Aesthetic appearance. The extremely small amount of roughness of the inner surface and the values of losses on local hydraulic resistance in the joints, which can be neglected (the roughness of copper pipes is 100 times lower than that of steel, and 4-5 times lower than that of polymer pipes). They are not afraid of UV exposure. Copper pipes are completely recycled after use.

© ANGRENCOPPER Это изображение имеет пустой атрибут alt; его имя файла - Stay-3D-editable-text-effect-803x800.png Startim
An den Wiesen 11,
21147  Hamburg
GERMANY

STARTIM GMBH
Amtsgericht Hamburg HRB 117196
Ust-Id.Nr.: DE 815319371(= VAT-ID )
Tel / Fax: +49-40226192-16 / Fax-19

©2026, ANGRENCOPPER
  • ABOUT COMPANY
  • OUR PRODUCTS
  • OUR GOALS
  • LOOKING FOR DEALER
  • OUR MISSION
  • OUR CLIENTS
  • CERTIFICATES
  • QUALITY CONTROL
  • CONTACTS
  • MEDIA WORLD
  • Login / Register